Buddy

PSA pop report: read population counts and card rarity

PSA pop report guide: read population counts, gem rate and grade splits, with a worked table showing which cards have scarce PSA 10s and what to check first.

7 min read

On this page
  1. Key takeaways
  2. What the PSA pop report shows for card scarcity
  3. How to read gem rate and total graded
  4. What changes the answer
  5. How to put it into practice
  6. Common mistakes
  7. FAQ
  8. Sources

The PSA pop report shows how many copies of a card PSA has graded, split by grade, and the share that earned a PSA 10 tells you how scarce a gem copy really is. When few copies earn the top grade, hitting a PSA 10 requires exceptional luck with factory condition and centering. When the high grade count is massive, top-tier copies are easy to buy regardless of how raw cards usually look.

The report is a census of graded cards, not of every card printed. A card can be common raw and still very scarce in PSA 10.

Key takeaways

  • A population report is a database that tracks every card a company has graded, organised by card, set and grade1.
  • Gem rate is PSA 10s divided by total graded, and a low rate means surviving 10s are hard to make and usually carry a bigger premium over a PSA 92.
  • Across Legendary Collection, GemRate data counted 142,967 grades and 8,286 PSA 10s, a set-wide gem rate of 5.8% as of October 20263.
  • Total graded measures how often a card gets submitted, which tracks demand more than rarity2.
  • Populations only go up over time, so always check the refresh date before you compare two cards2.

What the PSA pop report shows for card scarcity

The report gives you a count of graded copies at each grade from PSA 1 to PSA 10, plus the total. PokemonPriceTracker's guide describes a population report as a database that tracks every card graded, organised by card name and set, grade received, and totals at each grade1. That is enough to judge two things: how many gem copies exist, and how hard they were to produce.

A table from a single set shows the pattern clearly. PokeInvest's POP Series 4 report, refreshed November 2026, lists 3,571 cards graded and 224 PSA 10s, a 6.3% set gem rate2.

CardGradedPSA 10sGem rate
Mew #497980.8%
Deoxys #267460.9%
Flygon #326231.1%
Pikachu #133554913.8%
Pokemon Fan Club #92323715.9%

Mew #4 has nearly 1,000 submissions but only 8 PSA 10s. Pokemon Fan Club #9 has a quarter of the submissions and 37 PSA 10s2. Scarcity sits in the gem rate, not in the total.

How to read gem rate and total graded

Gem rate is PSA 10s divided by total graded, and it is the fastest way to compare cards. PokeInvest explains that high gem rates mean the card is easy to gem and PSA 10s are not scarce, while low rates mean surviving 10s are hard to make and usually carry a bigger premium over a PSA 92.

Total graded is a different signal. PokeInvest notes it measures how much a card gets submitted, which tracks demand more than rarity2. Read both together.

Grade distribution adds a third clue. PokemonPriceTracker points out that when a card has far more PSA 9s than PSA 10s, a sharp drop at the top shows how difficult gem mint is to achieve1. Its example for a Base Set Charizard works out to a PSA 10 rate of about 7.1%1.

Small samples mislead

A card with 3 PSA 10s out of 4 submissions looks rare or easy depending on how you frame it. PokeInvest only counts cards graded 50 or more times in its rarest-10s list for this reason2. Apply the same cut-off yourself.

What changes the answer

A population count has different meanings depending on the card, its era, and the date. Four main factors drive that interpretation.

Set and variant. Legendary Collection lists reverse foil and holo versions of the same Pokémon as separate rows. Charizard-Holo #3 has a 0.5% gem rate over 3,332 grades, while Charizard-Reverse Foil #3 has 87 PSA 10s over 4,700 grades, a 1.9% rate3. Check you are reading the right variant.

Vintage versus modern. Gem rates vary widely inside one set. In Legendary Collection, Jynx shows a 41.0% rate on a small base, while Dark Blastoise-Holo sits at 0.6% across 1,266 grades3. Low-volume cards can swing wildly on a handful of submissions.

Grading company. PokemonPriceTracker says PSA holds about 67% of Pokémon grading and that a PSA 10 typically commands a 10-30% premium over the same card from competitors1. That is the guide's own estimate, so treat it as a rough guide. A PSA count alone does not show total graded supply. GemRate combines PSA, BGS, SGC and CGC data for a cross-company view1.

Timing. Populations only rise2. A count that looked scarce last year may not be today. PSA's own submission volume is also large: GemRate reported 150,151 cards graded in one week in 2022, with Pokémon the most-graded category by a wide margin4. Many new slabs can push prices down.

How to put it into practice

Check three numbers before you decide to submit or buy: PSA 10 count, gem rate and the refresh date.

  1. Find the card and variant in the pop report and note total graded, PSA 10s and PSA 9s.
  2. Divide PSA 10s by total graded to get the gem rate.
  3. Compare that rate with the rest of the set. BetterPop's Legendary Collection page, for example, lists a 5.8% set average to benchmark against3.
  4. Look at the PSA 10 price next to the count. PokeInvest shows Pokemon Fan Club #9 at about $5,000 with a PSA 10 pop of 372.
  5. Check how fresh the data is. PokeInvest's page was refreshed on 9 November 20262.

Update speed matters if you are tracking a fast-moving card. A 2020 Elite Fourum thread asked how quickly the PSA pop report updates, and the replies pointed to pokemonprice.com, which charts population by grade over time5. The thread gave no official refresh schedule, so treat any live count as a snapshot.

Before you pay for grading, you also need to know the odds your own card reaches the grade. The AI grader estimates the odds of each grade from PSA, CGC, Beckett, TAG and SGC from photos of your card, includes a fake check, and measures centering against grader standards for a potential 10. Pair that estimate with the pop report's gem rate and you can see both how hard the grade is in general and how likely your copy is to get there.

If you also want the same read for another company, see how to read BGS population counts, and for fees and grade standards across companies, PSA, Beckett and CGC compared.

Common mistakes

The biggest mistake is treating a low population as proof of value. PokemonPriceTracker notes that scarcity only supports price when demand exists1. A rare slab nobody wants stays cheap.

Other errors to avoid:

  • Reading total graded as rarity. A high total reflects demand, not a hard grade2.
  • Ignoring submission pipelines. GemRate warns that when fears of "junk slabs" dominate the hobby, a card ranking high in recent grading may signal more slabs about to reach the market, which can correlate with lower prices4. In normal conditions the same list can be a leading indicator of demand.
  • Mixing up variants. Holo and reverse foil rows are separate in set reports3.
  • Using a stale count. Populations only rise, and a count from months ago understates supply2.
  • Trusting tiny samples. Skip gem rates built on fewer than 50 graded copies2.

FAQ

What does the PSA population report show for card scarcity?

It shows how many copies of a card PSA has graded at each grade, plus the total. The share of PSA 10s out of total graded, the gem rate, is the clearest scarcity signal. A low gem rate means top-grade copies are hard to produce and usually carry a premium over a PSA 92.

What is a PSA gem rate?

Gem rate is the number of PSA 10s divided by total cards graded. In POP Series 4, the set gem rate is 6.3%, from 224 PSA 10s over 3,571 graded2. Compare a card's rate with its set to see whether a 10 is easy or hard to get.

How often is the PSA pop report updated?

PSA has no schedule in the material above. A 2020 collector thread asked the same question without an official answer, and a population chart on pokemonprice.com was suggested for tracking changes by grade5. Check the refresh date on whatever tool you use.

Does a low PSA 10 population mean a card is worth more?

Often a low PSA 10 count supports a higher price, but demand has to exist as well1. A scarce gem of an unpopular card can still sell cheaply. Compare the count with recent sale prices.

Where can I see population across several grading companies?

GemRate combines PSA, BGS, SGC and CGC data into one universal population report1. It helps when you want total graded supply rather than one company's count.

Sources

  1. 1Pokemon Card Population Report Guide: Rarity Analysis 2026pokemonpricetracker.com
  2. 2POP Series 4 PSA Population Report (November 2026) — Pop by Grade & Gem Ratespokeinvest.io
  3. 3Legendary Collection PSA Population Reportbetter-pop.com
  4. 4Pop Report: TCG Continues Surge as PSA's Most-Graded Categorysportscardinvestor.com
  5. 5Does anyone know how quickly the PSA Pop Report is updated? - Marketelitefourum.com

Buddy is independent and isn’t affiliated with PSA, CGC, Beckett, TAG, SGC or The Pokémon Company. Fees and prices change; check the sources for the latest.

Check your next card before you send it off.

Buddy grades from two photos by the rules of PSA, CGC, Beckett, TAG and SGC, checks for fakes, and shows what it sells for.

Your phone
Download on the App Store

Free to download, with 3 free scans.

More articles